changing the fast to slow fader

I am not sure which controller you are using, but you might be able to edit the profile on the light to reverse this. I don't know if you will be able to do this however, since I have only done this on high end consoles before. Ultimately, what you do is reverse the console reading, so instead of 0>255 it would be 255>0, meaning it starts at 255 and fades down to 0.

Ya need to know the console you are using. Thanks.
Sincerely,

okay, i really doubt that i can do it. i just have an eliminator basic controller. i would guess that i will be able to do what i want once i can afford to move up to the 260. quick note: if anyone hears someone talking about the new chauvet obey series controllers and that they are advertising them to be able to control speed and fade times in individual steps/scenes, it is not true. i have spoken with them and they are calling it a 'misprint' yeah, a misprint on the box, on the manual and on the website. just don't want to have someone else having to spend a lot of time to find that out.

The 260 what?

Magic 260 is what he is referring too.
Sincerely,

Sorry, I was unfamiliar with that console. Out of curiosity, what are the specifics of the light system that you're running (types of fixtures and such)?

i have all led lighting. i recently purchased 4 chauvet colordash pars and 2 colordash batten for the front spots, fills and aimed back to the drums. i have 2 colorstrips that i put side by side behind the drums wired in a master/slave chain for effect and uplighting. i also have 2 (soon to be 2 more) of the x-scan scanners. right now i am just using an eliminator controller. i have been slowly replacing each piece that i used to have with my current and better lineup. my controller, as pointed out by this discussion, does not do what i want it to do but the new controller will have to be the last piece of the system to get replaced because the bigger and brighter show is more important to getting a gig than the little stuff i am missing with this controller. if interested you can see what my lineup looks like on www.youtube.com/metropaulitan this was the first show with my colordash lights and i still didn't have the two going back to the drums. that has been corrected.

A Magic 260 would be great. I use one for all LED shows every once in a while. The hard part is keeping track of what is where and what page you are on, lol.

I've never used a 260, but aside from that board, you may want to consider a PC controller. I personally prefer the hardware based ones, but I use a software solution to control my moving lights. I can agree with SerraAva that more advanced boards that don't really have a display can make programing and following a large light show difficult, which is why I chose a PC controller for my movers. It's a matter of personal preference and what you feel comfortable working with, so go with whatever you'd like, but most software controllers will make programming easier and allow you to get the most out of your system. I just thought I'd make the suggestion!

Does anybody use pencil and paper anymore?

When the guy who was programming the lights for the Moody Blues came into the venue, he had documented all his scenes on paper with a pen. He was able to get a console he wanted from the lighting company, who was only too happy to provide. I remember the owner playing with that console before the previous show.

(Moody Blues was travelling light, only carrying backline, in-ears, monitors and pre-recorded tracks(all 32 of them! It was a totally canned show, prop up the old farts and press play))