Changing DMX values for fixtures in MYDMX

Former Member

Jingles

Is it possible to move a fixture in the dmx universe without having to re-create the scene. I have tried to move jelly dome from DMX value 105 down to 55 but I have lost all the scene data. When I move it back to 105 it works again.

regards

Sean

3/9/1111:59 AM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Oh, that is not dmx value, that is dmx channel. in each channel there are 255 values. lol.
I don't believe my dmx supports what your trying to do.

3/9/1112:14 PM

❤️ 0

Former Member

Hi

Sorry I think I have confused the issue. At the moment my Jellydome has a DMX start value of 105 in the setup screen. I want to move the fixture to a different DMX strta value say 55 but when I do this I loose all the created scenes with the old value.

I hope that makes sense now

Sean

3/9/1111:19 PM

❤️ 0

JinglesForum Admin

Ok, it is most commonly referred too as DMX starting address. And I understood your question, it is still not a supported feature to move fixtures starting addresses around and have the programming follow it. That is not supported in my dmx. Sorry.
Sincerely,

3/10/1112:08 AM

❤️ 0

Former Member

No worries. Thanks for the information

Sean

3/10/119:57 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...