Beam angle & lock fixture position

Former Member

In setting up conventional (leko) lights I have 3 different beam angles (19,26,30deg) on a total of 9 fixtures by 2 different mfrs (ETC & Colortran). I began under \_varied\public and added my conventional lights and patched into the correct dimmer/dmx addresses. Is there a way to assign the various beam angles (beam width not position) to these? Also, once positioned in the Easy View is there a way to lock objects and fixtures so I don't accidentally move them?

2/3/126:44 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

If you go to the layers tab there should be a little check box next to objects and fixtures with a logo icon. That locks the objects or fixtures to their current position and cannot be moved unless it is unlocked.

As far as beam angle for fixtures in the 3D that is set in the scan library editor for that specific profile. You can crested your own and use them.
Sincerely,

2/4/1212:34 PM

❤️ 0

Former Member

Jingles, thanks so much. That turned me loose. Watch out world!

2/7/127:05 PM

❤️ 0

Former Member

BTW when are you going to post the mydmx link for youtube?

2/7/127:06 PM

❤️ 0

JinglesForum Admin

I think that video is too long for my you tube account. I'll have to check into that.
Sincerely,