BASIC MYDMX SETUP

Former Member

Hi -

I have a technical support question:

I am trying to control 2 ADJ megabar LED units through MyDMX.

Both LED units respond to MyDMX faders, etc. when in slave mode. However, when I put the units in DMX mode, they no loger respond to MyDMX. The units are set to "D-P3" for 11 channel mode. I've given one unit the address "d.001" and the other "d.002". In MyDMX, there are 2 11-channel units assigned to dmx channels 1-11 and 12-22 respectively.

How can I get both LED units to respond independently to signals from MyDMX? What should the settings be in MyDMX? On the Megabar LED units?

Thank you for your support!

7/4/0811:54 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

what is the d.002? i dont see that anywhere in the manual. let me know. Sincerely,

7/5/0812:49 AM

❤️ 0

Former Member

James-

Thank you for the very fast reply ! I'm very new to dmx, so I highly appreciate the support.

"d.002" is just the channel number, I think. On the MegabarLed, if you hit the mode button you can select the operational mode for the megabar : "Auto", "SA31" (operation by sound), "Slave", and "d.xxx" (for dmx, xxx can be in the range of 001 - 512, and can be changed by hitting the up/down bottons on the megabar).

When in "slave" mode the megabars respond fine to mydmx, however, I can't seem to program them as two seperate units. What would be the settings I need on the megabarled and in mydmx to be able to program the two bars seperately.

Thank you !

Dave

7/5/081:25 AM

❤️ 0

JinglesForum Admin

Well on my dmx just keep it as you have it for the profiles. but change the d.002 to d.012. has to match the starting address i assume. that is weird if it responds to DMX in slave mode. i would def. call up tech support monday morning if it is still doing that. also are you using a terminator? Sincerely,

7/5/081:42 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...