Skip to main content

Hi everybody,

I'm new to DMX and currently am trying to configure my setup so i apologize in advance if this is a stupid question:

I'm using a ADJ Operator384 controller with Donner transmitter and 3 receivers.

I have the ADJ JellyDome, an rgb400 laser and a laser moving head (other brands), which also support DMX512.

I got the Donner transmitter and receivers working properly, as all 3 units are responding when i move the sliders on the controller up and down.

My problem is that all 3 light fixtures are currently assigned to fixture button 1 on the controller. I would like to control each fixture individually, but can't seem to figure out a way to do this. Any help is appreciated!


Original Post

Further details:

The JellyDome is a 3 channel DMX fixture, so i set it to DMX channel 1.

The rgb laser has 9 dmx channels, so i set the DMX address on it to channel 4.

The laser moving head has option for 12 or 14 channel DMX, i set it to be 14 channel and assigned DMX address for it to 13.

All 3 fixtures still operate under fixture button 1 on my controller, however, i'd like to assign each fixture its own fixture number on my controller.

Hope this clarifies things a bit more.

Last edited by Romchik

Add Reply

Link copied to your clipboard.