American DJ Mega Go Flood Par - Master/slave??

I am encountering exactly the same issue. None of my ADJ Mega GO Flood PAR will follow the other one. But both do follow any of my Mega TriPAR Profile.
The manual says the Mega GO Flood PAR will work as Master and I would like to use them exactly that way. How do I activate master-mode?

http://www.americandj.com/pdff...ega_go_flood_par.pdf

When in doubt, read the manual.

Thanks for that CMBDJ, unfortunately you didn't read the post properly.

I already said that the manual doesn't seem to suggest anything more than linking them.

I have since discovered that I can get them running together if I adjust the mode button at the back on the master unit so that they are both on the same channel. I have to do this each time i link them.

However I have the remote control and when I use this to select one of the "auto" modes it seems to cancel out the master/slave, so that when i go back to sound active mode they suddenly aren't working together again!

Frustrating. Maybe it is just a poor design.

Hi all
The manual is useless on this topic.
There is however a video on youtube that shows how to do it so thanks to them:
Set the slaves in Address mode using the Mode button until you get A001. Each slave needs to have a unique address so A001, A002 etc.
Then hey-presto - simple as. Set the master to do what you wish and rest will follow.

http://www.youtube.com/watch?v=FS_O4TWVbnw