american dj lotus

When you first plug the lotus in it shu]uold rotate a few times, I am pretty ure they are farily silent, so that souounds strange that it is making noise.

-AMP

i have a lotus and an agreesor, yup it suppose to spin when you first plug it in and than stop unless there is music playing than it would start spinning again. and with the noise its normal, i know it sounds like high pitch grounding noise or something but thats normal. When you play music it'll drown out the noise of the unit. just make sure you cool it down once in a while. adj recommends every 15 minutes on 15 minutes off...have fun

Phil

It rotates a few times at first then stops.I dont know if the noise is the fan or the moter is bad.

Well thank you . The music will overide the noise,thanks

quote:

Originally posted by UltimateSound:
[qb] adj recommends every 15 minutes on 15 minutes off...have fun

Phil [/qb]

I believe the actual duty cycle is 10 minutes on, and 10 minutes off. At least that's what mine is. and yes it does move when first turned on, and the noise will drown out with the music. You won't be using this light without music anyway, at least I don't think so. There is a audio sensitivity knob on the back of the unit also to control its movement.

for me its 15 mins on 5-10mins off or in standby mode.

again i have a Raider light and its VERY noisy. those sounds that you hear are its rotators inside rubbing against the power supply. correct me if i'm wrong.

The noise is normal! Especially as it ages! The axis inside that allows the bulb to spin has a conductor that rubs up against a copper ring! As this spins the copper becomes less slick and makes almost a grinding sound! Now there is nothing wrong with the light and thats just how it was built! The same conductors are used in lights such as the Vertigo, Mystic, Avenger, and so on! But nothing to worry about!