hey all.
I bought an ADJ Operator II off eBay and everything works fine except the tilt wheel. I have a couple PocketScans assigned to scanners 1 and 2. When I have them selected the Pan control works fine, but the Tilt control does nothing.
I went through the process of assigning the wheels as described in another post, shown here...
In Program Mode, Press both ASSIGN & MODE buttons together...an LED will light up on the PAN or TILT side (selectable by using the BANK up / down buttons) you will see green LED switch sides.... TAP DISPLAY button selects 8 or 16 channel mode...Select the SCANNER'S (scanner green LED will indicate scanners selected)you wish to assign...Hold MODE button and press the SCENE button above the channel you wish to assign (all LED'S will Flash 2 to 3 times to acknowlegde Assignment. Repeat process for 2nd assignment.
This still doesn't get the wheel working, and the PDF manual I downloaded doesn't cover this issue. Any ideas?
Original Post