Is it possible to get a profile for this unit? Thanks in advance
Original Post
Replies sorted oldest to newest
Thanks for the profile, but it doesn't seem to control the fixture. Is there a special mode I should try?
Elaborate please on doesn't seem to control the fixture. Also be sure to read the user manual for the dekker LED to ensure you have it in the correct mode and DMX address settings etc.
Thanks.
Sincerely,
Thanks.
Sincerely,
Not a problem. I have followed the manual's recommendation to operate in DMX, you must press the Mode button untill "3XXX" is displayed. Problem is, I can't get to "XXX" only "3001". So I tried every other Mode: "2001-2200"; 3001-3300; etc, to no avail.
Thanks
Angela
Thanks
Angela
Haha. The XXX is just our way of representing numbers. So you are doing it right you just need to assign it a number. For example to have it start on dmx address 5. You hit mode until you see 3 then hit the up button until you see 3005. And that is how the fixture knows it is in dmx mode and starting at dmx address 005. Make sense? And I apologize, I am not laughing at you.
Let me know how it goes.
Sincerely,
Let me know how it goes.
Sincerely,
LOL! Had to laugh myself because I took it so literally. Seems to obey with "3001". Issue solved. However, is there a great combination that gives deep purple without the red and blue squares being so pronounced?
Thanks
Thanks
No sorry. This unit is not designed for RGB color mixing. And to get a nice deep purple out of a LED fixture it is the Blue LED that has to be more like a royal blue than a med. or light blue.
Sincerely,
Sincerely,
Thanks for the color tip; works well with my LED PAR 38s. The Dekker however, seem to be the bigger challenge. I've tried to use "3024" and "3025" and I only get the white rotating light. No color change response. Is there another I'm missing?
Hey Jingles,
Thanks for your initial help. Seems I was premature with the Dekker lighting. They maintained the color for a moment and then went on their beat. If they are at address 155 in myDmx, should the entry code be "3155" to control the lighting?
Thanks for your initial help. Seems I was premature with the Dekker lighting. They maintained the color for a moment and then went on their beat. If they are at address 155 in myDmx, should the entry code be "3155" to control the lighting?
Sorry for the delay. Yes 3155 sounds correct. Be sure you are hitting the enter button to confirm your settings. Also make sure that the my dmx interface is being read by the program.
Sincerely,
Sincerely,