Adj Inno Spot led

Hi nick, looking at the DMX traits of the Inno Spot LED (50W) http://intranet.americandj.com...82/inno_spot_led.pdf

There is a sound active function for color wheel and gobo wheel.

You could program the inno spots to be on those sound active values and then either program some steps of different positions or program steps of the built in movements on different speeds using channels 8 and 9. I'm sure with a little creativity and experimenting, you can find something close to what you are trying to do and in the same scene as the other lights being in sound active too.

Is it not possible to make a profile with a full sound to light function that controls motion as well. You created one for the inno beam and the inno rolls and scans so why not the inno spot.

I understand, but for whatever reason full sound to light functions were not put into the Inno Spot LED. I do not know the reasons, and typically we do not release firmware updates to our fixtures, as ssomething like this may need several board IC updates. I apologize, but it is how it is for these fixtures. Thanks!

This really is a bad feature of these units having no sound options on movement.
Yet ironically the four built in shows in non DMX mode are all sound active movements??
So how did ADJ acheive this?
And why did they not put those four shows within the DMX channels (channel 8) on this unit where there is 12 programmed movements, which are all pretty useless to the average DJ who mounts units on trussing wanting forward pointing beams like the ones in the four non DMX programmed shows.
Big mistake from ADJ there!