When I try to run my scenes in the visualizer nothing happens. You can see that it is running through the scenes and it will flash every once in a while but that is it.
Original Post
Replies sorted oldest to newest
What fixtures are you using?
ahh I missed this one. Sorry about that. Yes please let us know what fixtures you have.
Sincerely,
Sincerely,
I have 20 adj color 250d and 2 color 150. Also I tryed the generic par 56 trick for my eliminator dimmer packs with no luck.
Another quetion while Im at it. How do I add fixtures that have the same address as one that alrteady exsists. I double the addresses and just program 10 of the color 250D. Thanks or all the help guys.
Another quetion while Im at it. How do I add fixtures that have the same address as one that alrteady exsists. I double the addresses and just program 10 of the color 250D. Thanks or all the help guys.
This same method applies to any fixture profile. check out this video I made and apply it to your color 250D's and let me know if you have any questions. http://youtu.be/IymiGdEKSqk
Sincerely,
Sincerely,
i still can get my fixtures to light up in the visualizer. Somebody give me a clue.
This seems like a profile bug. when any fixture has a 0-255 range for strobe generally strobe channel at 0 value should be strobe off. I modified the profile and made a preset for channel 3 value 0 is shutter open and then values 1-255 are strobe. but the 3D is still acting like it is not there. which leads me to believe it might be a bug. I'm gonna play around with this a little more and let you know how it goes.
Sincerely,
Sincerely,
OK Think I fixed it. You will have to replace the profile in your library with this one: http://db.tt/lrxgzGkA
It should give you shutter open than strobe from 1-255 on channel 3 of the Color 250D. If it does not do it in the 3D you will have to like in the video manually drag the profile in to the 3D patch area. Make sense?
Sincerely,
It should give you shutter open than strobe from 1-255 on channel 3 of the Color 250D. If it does not do it in the 3D you will have to like in the video manually drag the profile in to the 3D patch area. Make sense?
Sincerely,