Skip to main content

4 replies

3D Visualizer

R recluse1Mobile DJ
I'm using 64 LED Pro's in my set up. When using MYDMX, I cant seem to get the lights to show "On" in the 3D Visualizer unless I have channel 1 up (say I'm using red)in conjuntion with channel 6 up. The actual light is working properly on my truss with only channel 1 up for red, 2 for blue, etc. Any idea why I have to use channel 6 to see the 3D LED light up?? Im pretty sure I have the LED Pro's set up for 6 channel and not 3 channel DMX.
Original Post

Replies sorted oldest to newest

J JinglesForum Admin
hey recluse. when your using a profile like that for the leds if there is a seperate dimmer channel you will need to have the dimmer on for the led output to shine in the 3D. its kinda like a shutter for it. the software wont show light if there is a shutter channel that is not "open". its kinda weird. if you want try using your pros in 7 channel mode. hope this makes sense. if you have any more questions feele free to ask. sincerely,

Add Reply

Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×