OK, SO, here is what I have and what is happening.
Compu 2006 DMX controller in the back of house, cable run about 150' to stage right-5 LED Pars (DMX 90-120?)then 10' to front of stage through 4 LED Pars(250-270?)then 10' to stage left through 5 LED Pars (160-180?)...Finally 200-300' to the ceiling 2 ADJ Performance Scans through 2 fantasy's, then two more Performance Scans(27-50ish)
When I hook everything up the third set of LED Pars does a weird random flicker. Everything is addressed correctly...I have triple checked. If I end the chain after all the pars(before it runs to the ceiling), everything works great(except the fixtures on the ceiling, of course).
Yes I have a terminator on the last Performance Scan, No not mic cables (at least not on any run over 18 inches)
Again, any ideas???
Thanks!