Skip to main content

Reply to "Master/Slave Mode vs. Sound Active Mode"

ok from the manual, no master/slave mode but u have these other options.
"Sound Active Mode:
In this mode the P36 LED will react to sound, and chase through the
different colors.
1. Plug the fixture in and put dipswitch #10 in the “ON” postion.
2. The fixture will now change via sound.
Auto Mode:
1. Plug the fixture in and put dipswitches # 9 and 10 in the “ON”
postion.
2. Adjust the speed by adjusting dipswitches 1-7.
RGB Mode:
1. Plug the fixture in and put dipswitches #8, 9, and 10 in the “ON”
postion.
2. Dipswitch #1 alone will project Red at 25% intensity, dipswitch #2
alone will project Red at 50% intensity. Combine dipswitches 1 & 2
and Red will be projected at 100% intensity.
Dipswitch #3 alone will project Green at 25% intensity, dipswitch
#4 alone will project Green at 50% intensity. Combine dipswitches
3 & 4 and Green will be projected at 100% intensity.
Dipswitch #5 alone will project Blue at 25% intensity, dipswitch #6
alone will project Blue at 50% intensity. Combine dipswitches 5 & 6
and Blue will be projected at 100% intensity."
Sincerely,
×
×
×
×