Skip to main content

Reply to "LED Spectrum issue"

On August 16, 2008 my lighting rig was powered up before an event. The moment the LED Spectrum mounted to stage left was introduced to the main power supply, the audible sound of an electrical pop and burn was heard. The lighting trees are similar to that pictured below.

I have to chime in, is it possible that you are the reason for the surge, you mentioned that you introduced the spectrum after all else was plug in and operating. If that was the case you caused the surge, if not the case and everything was turned off, then the culprit lies else where.

but as I re read your post it seems you are at fault. Never introduce additional electrical product to a live wire.
×
×
×
×