Activity

Reply by Ken Y.

Are you trying to copy from an IPad to a Mac? Sometimes filenames that are allowed in IOS are not allowed in OSX. For example "Scene 1"...

Reply by evabrown

This wiflex system is just awesome. It comes with modern technology. The lighting system is wonderful. It needs lots of power with a...

Reply by BlazinVybes

I'm trying to learn how to create these master scenes keep hearing referrence to it but no "how to" anywhere. can someone point me in...

Reply by shoot summ

Thanks, I wont run a show off of the Surface, but I would like to be able to tinker with shows when I am traveling. Will do some...

Reply by Jingles8302

Hi, the software doesn't work well on displays higher than native 1080p, so you need to use the Windows magnify feature in the windows...

Reply by ThomasD

So I have 2 , 4 on a bar, tri par, sold by Kam and CR Lite as Power Party Bar. I have made a kind of working profile by setting one...

Reply by Ken Y.

Keywords "pan" and "tilt" are required in the fixture profile you made. The effect uses those to find the channels to move.

Reply by Ken Y.

I found out that IOS 11 added a new feature called smart punctuation that needs to be disabled in order to use special characters like...

Reply by Jingles8302

Can you show a quick example video? I'd have to see what you are doing in order to see whats the culprit.

Reply by Jingles8302

Bookmark this link as you are able to browse and download profiles 24/7/365 from this online library. It is also updated daily. ...

Reply by JulietJane

I didn't need to install any other drivers, i just had to configure the buttons, because those weren't configured right in the first...

Reply by Jingles8302

Hi, thank you for reporting this to us, we don't get it to crash but the apostrophe does cause issues when entering text after using it,...

Reply by JulietJane

its not really like a laptop mousepad, but it functions. I didn't need to install any other drivers, i just had to configure the...

Reply by Jingles8302

Hi, if you are in the USA please give Kevin a call within the next 2 and a half hours or mon-fri 8am-5pm pacific standard time.

Reply by Jingles8302

Hi, the drivers can be re-installed by simply going to C:\MyDMX2.1\driver and running the "SiudiDriver" application you see, but be sure...

Reply by Shaeded

Hello, I just got the unit working wich my Windows 32bit machine. Yay i still need support for the Windows 64bit machine. :-(

Reply by Shaeded

Hi i have the myDMX 2.1 software installed and the sofware is running, but my myDMX 2.0 interface wont install properly. my OS is...

Reply by Jingles8302

This is over a year old, any fix by now would be implemented into the software. download the latest MyDMX 2.1 software form the product ...

Reply by Jingles8302

Yes I can but I am backlogged as there is a official request form for requesting these from us, if you remind me I can maybe get it to...

Reply by Johnny D

same issue here with my 4.1.. and Im scouring the internet to see if anyone knows why.. so far nothing

Reply by Jingles8302

Hi you can try making a profile yourself if you are familiar with the DMX traits. https://youtu.be/ois80xsiufA In order for me to make a...

Reply by mik ou

It is often the first unit (d001) that stops working first but it can be random.

Reply by shoot summ

Is it the same unit, or same address that stops working every time? Or is it just random, 1 stops working, and it is never the same one?

Reply by Dj Ricky

I just got 2 Chauvet Mini Kinta’s. I tried making a profile, for my Airstream Bridge, but it isn’t giving me everything I need. Could...

Reply by iMaik

Do you have the fixture profile of the Hex?

Reply by Jingles8302

Hi, please email me when you can and reference this thread. jamesk@adj.com We have some more follow up questions for you. Thanks!

Reply by DamonOliver

Turns out the spider light I ordered and the one they sent are controlled differently. Attaching a pic from the "manual." I hate to ask,...

Reply by Jingles8302

Hi, while we look into this, the manual online states 53 channels max: https://cdb.s3-us-west-1.amazo...6938/dotz_matrix.pdf Do you have...

Reply by Jingles8302

Does the display still flash when it is on a wired DMX chain? The flashing just means it isn't picking up a DMX signal either wireless...

Reply by DamonOliver

https://www.monoprice.com/product?p_id=612988 I have a generic 8x3w spider light that is 15 channels. I have a .pff fixture profile for...

Reply by Jingles8302

Hi, try reinstalling the software but disable or exclude the Compu show directory on your C drive on your anti-virus software or in...

Reply by NightOwl

Hi James, If I send you copies of manuals are you able to do the same for a few fixtures for me? Is there a way for me to build them...

Reply by shoot summ

Looks like it was my AV, I turned of realtime scanning, deleted everything, rebooted, and tried again, took less than 5 minutes. Thank...

Reply by Jingles

Ok. Email me a screen shot of the .ssl installer part and also the computers specs and I’ll see what I can do. Jamesk@adj.com

Reply by shoot summ

Just killed the install, deleted the diretory and all files, downloaded the zip again, unzipped to desktop and started again. Watching...

Reply by shoot summ

I'm on a Surface Pro 3, I5, 8GB ram, 256GB SSD. Windows 10 Pro, V1803, build 17134.407. Any special consideration on where I unzip the...

Reply by Jingles8302

Hi, there's no way it should take even more than 5 minutes. Are you using it on a Mac or Windows, and which version (IE, win 7,8,10, Mac...

Reply by shoot summ

Thanks, connection is fine, I'm actually running the install concurrently on 2 different machines and the behaviour on both is the same.

Reply by Jingles8302

Hi, no the SSL library is downloaded from the internet via a server to ensure all the latest profiles are included and installed that...

Reply by Jingles8302

Try re-installing the drivers, go to the C drive and open the compu show folder and find the "SiudiDriver" application and run it. That...

Reply by mikey 2

I have send you a mail with a link to the video. In the video I tested with the Jan. 31, 2018 version. I tested with the Aug. 2, 2018...

Reply by Jingles

Hi, sounds like a weird issue. You’ll want to either call into the service department or email them. Service@adj.com

Reply by Jingles

Hi. Can you email me a small video of it forgetting the Artnet device? Jamesk@Adj.com is one of the emails you can reach me at. Thanks!

Reply by Jingles

Compu Show is still an active software. It is already incredibly stable and we make profiles for it as often as we get requests.

Reply by vishoussoundz

In the Marq Gesture spot 300 page, It states that the only way for beam on to work. with adj mydmx2.1 is to set channel 13 between 60-70...

Reply by Jingles8302

What channel mode do you want? I am reluctant to make anything above 17ch mode as it does not convey the pixel layout and that would be...

Reply by Jingles8302

When you make a pan and tilt effect and you want the intensity recorded into it, you need to check the box for include set levels, that...

Reply by tanguero

Strange behaviour , indeed ! I personally never had the case. I'm trying to understand what is the plausible cause of your beam being...

Reply by wheeler1

Hi, I have MYDMX 3.0 And Inno Pocket Roll... I have found you can not program the pan movement with the Pan and tilt in the effects tab,...
×
×
×
×